WCDMA Signaling
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
401
User Manual 1173.9657.02 ─ 11
Example:
See
Firmware/Software:
V1.0.15.0
Options:
R&S CMW-KS410
Manual operation:
See
2.6.9.5
Test Mode Connection Settings
The following commands configure RMC and HSPA test mode connections.
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:TYPE
.................................................401
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:KTLReconfig
...................................... 401
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:RMC:DRATe
...................................... 402
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:RMC:TMODe
......................................402
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:RMC:RLCMode
.................................. 403
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:RMC:UCRC
........................................403
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:RMC:DLRessources
............................403
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:RMC:DATA
........................................ 404
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:HSPA:PROCedure
..............................405
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:HSPA:DIRection
................................. 405
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:HSPA:DATA
.......................................405
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:HSPA:EINSertion
................................406
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:HSPA:USDU
...................................... 406
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:TYPE
<Type>
Selects the test mode connection type.
Parameters:
<Type>
RMC | HSPA | RHSPa | FACH
RMC
: RMC in CS domain
HSPA
: HSPA in PS domain
RHSPa
: RMC plus HSPA
FACH
: test using CELL_FACH state in CS domain
*RST:
RMC
Example:
See
Firmware/Software:
V3.0.20
V3.2.10: added "FACH"
Options:
R&S CMW-KS401 for HSPA, RHSPa
Manual operation:
See
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:KTLReconfig
<Enable>
Specifies whether the test loop is kept closed when the operating band or the carrier
frequency is reconfigured during an established test mode connection with test loop.
Command Reference
深圳德标仪器
135-1095-0799