R&S CMW-KG4 Series, User Manual

Page: 405 / 988

WCDMA Signaling
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
405 User Manual 1173.9657.02 ─ 11
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:HSPA:PROCedure
<Procedure>
Selects whether an HSPA test mode connection is set up automatically when a test
mode connection is established, or can be set up manually later on.
Parameters:
<Procedure> CSPS | CSOPs
CSPS : Establish both an RMC connection in the CS domain and
an HSPA test mode connection in the PS domain.
CSOPs : Establish only an RMC connection in the CS domain.
You can trigger an HSPA connection setup manually later on if
desired.
*RST:
CSPS
Example: See Configuring Connection Types
Firmware/Software: V3.0.20
Options: R&S CMW-KS401
Manual operation: See "Test Mode Procedure" on page 186
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:HSPA:DIRection <Direction>
Selects the HSPA test mode direction.
Parameters:
<Direction> HSDPa | HSPA
HSDPa : HSDPA only
HSPA : HSDPA + HSUPA
*RST: HSDP
Example: See Configuring Connection Types
Firmware/Software: V3.0.20
Options: R&S CMW-KS401
Manual operation: See "Direction" on page 186
CONFigure:WCDMa:SIGN<i>:CONNection:TMODe:HSPA:DATA <Pattern>
Selects the bit pattern to be transmitted as user information on the HS-DSCH.
Besides "All 0", "All 1" and "Alternating 0101...", pseudo-random bit sequences of vari-
able length are available.
Parameters:
<Pattern> ALL0 | ALL1 | ALTernating | PRBS9 | PRBS11 | PRBS13 |
PRBS15
*RST:
PRBS9
Example: See Configuring Connection Types
Command Reference
深圳德标仪器
135-1095-0799