R&G Racing
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
Page | 13
Use the two indicator connectors (item 23 – CON0046) to connect the indicators to the OEM loom if using mini
indicators.
If fitting R&G Aero Indicators with LED’s, the yellow wire on the Aero Indicators connects with the green/red
(left indicator) or green/red (right indicator) wire on the OEM loom and the black wire on the Aero Indicators
connects with the black wire on the loom. 1x set of RGR0001 resistors (available separately) are required to
achieve the correct flash rate.
If fitting R&G Mini Indicators with bulbs, the black/white wire on the Mini Indicators connects with the
green/red (left indicator) or green/red (right indicator) wire on the OEM loom and the black wire on the Mini
Indicators connects with the black wire on the loom. No resistors are required.
If fitting R&G Mini Indicators with LED’s, the black/white wire on the Mini Indicators connects with the
green/red (left indicator) or green/red (right indicator) wire on the OEM loom and the black wire on the Mini
Indicators connects with the black wire on the loom. 1x set of RGR0001 resistors (available separately) are
required to achieve the correct flash rate.
Check for the correct operation of all lights at this stage.
Tuck the wiring neatly to one side using cable ties/cable clips and re-fit the ECU and its plastic mount, in a
similar way to how it was removed. There are slots in the underseat cover to mount the plastic fixings, as shown
in pictures 42, 43, 44 & 45.
Ensure the tail tidy is correctly fitted and secured in place before re-fitting the seat/tail unit.
Re-fit the licence plate (it may require drilling).
Depending on local laws, attach enclosed reflector in an appropriate location.
Test the licence plate illuminator and all lights before riding.
ISSUE 1 15/07/2016 (AR)
Digital copies of these instructions are available to download from
CONSUMER NOTICE
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design changes which do not
diminish their performance or visual appeal and supplying them in such state shall conform to the order. The Buyer acknowledges no representation or
warranty (other than as to title) has been given or will apply to the Products other than those in R&G’s order or confirmation and the Buyer confirms it
has chosen the Products as being of merchantable quality and suitable for its particular purposes. Where R&G fits the Products or undertakes other
services it shall exercise reasonable skill and care and rectify any fault free of charge unless the workmanship has been disturbed. The Buyer is
responsible for ensuring that the warranty on the motorcycle is not affected by the fitting of the Products. On return of any defective Products R&G
shall at its option either supply a replacement or refund the purchase money but shall not be liable if the Products have been modified or used or
maintained otherwise than in accordance with R&G’s or manufacturer’s instructions and good engineering practice or if the defect arises from accident
or neglect. Other than identified above and subject to R&G not limiting its liability for causing death and personal injury, it shall not be liable for
indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for the Products or the fitting or service
concerned. These terms do not affect the Buyer’s statutory rights.
R&G RACING RETURNS POLICY (NON-FAULTY GOODS)
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if they were purchased direct
from us (customer must prove if necessary). Otherwise to be returned to original vendor. Goods must be in re-sellable condition, in the opinion of R&G
Racing. All returns are subject to a 25% restocking and handling fee (25% of the gross value exc. P&P – at the prevailing price at time of purchase). The
customer must pay any and all carriage charges. No returns of discontinued products, unless within 14 days of purchase. This policy does not affect your
statutory rights and does not refer to faulty goods.
