Page
14
of
14
CP0460
R&G
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
•
Den
Distanzhalter
S0027für die rechte
Seite (Artikel 4) über das hervorstehende Ende der
Schraube
schieben.
•
Lassen Sie die original Unterlegscheibe in Position (siehe Abbildung 2) und die Schraube
mit der Sturzpad-Einheit anstelle der zuvor entfernten Montageschraube für den Motor
an der rechten Seite montieren
–
siehe Abbildung 4.
•
BITTE DARAUF ACHTEN, DASS DAS STURZPAD WIE IN ABBILDUNG ‘
A
’ POSITIONIERT
IST (DAS GRÖSSERE ENDE DES STURZPADS ZUM VORDERTEIL DES MOTORRADS
GERICHTET).
•
Die
Schraube
mit dem empfohlenen Anzugsdrehmoment des Herstellers befestigen. Bitte
darauf achten, dass das Sturzpad und der Distanzhalter eng am Rahmen sitzen
–
siehe
Abbildung 5.
•
Wenn noch nicht bereits montiert, montieren Sie die Bubble-Aufkleber in den
Vertiefungen der Sturzpad-Schutzkappen.
•
Montieren Sie die Schutzkappe am Sturzpad wie in Abbildung 6 abgebildet.
AUSGABE 3 - 22/05/2019 (DM)
CONSUMER NOTICE
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make
design changes which do not diminish their performance or visual appeal and supplying them in such state shall conform
to the order. The Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply
to the Products
other than those in R&G’s order or confirmation and the Buyer confirms it has chosen the Products as
being of merchantable quality and suitable for its particular purposes. Where R&G fits the Products or undertakes other
services it shall exercise reasonable skill and care and rectify any fault free of charge unless the workmanship has been
disturbed. The Buyer is responsible for ensuring that the warranty on the motorcycle is not affected by the fitting of the
Products. On return of any defective Products R&G shall at its option either supply a replacement or refund the purchase
money but shall not be liable if the Products have been modified or used or maintained otherwise than in accordance
with R&G’s or manufacturer’s instructions and good engineering p
ractice or if the defect arises from accident or neglect.
Other than identified above and subject to R&G not limiting its liability for causing death and personal injury, it shall not
be liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for
the Products or the fitting or service concerned. These terms do not affect the Buyer’s statutory rights.
R&G RETURNS POLICY (NON-FAULTY GOODS)
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to
us if they were purchased direct from us (customer must prove if necessary). Otherwise to be returned to original
vendor. Goods must be in re-sellable condition, in the opinion of R&G. All returns are subject to a 25% restocking and
handling fee (25% of the gross value exc. P&P
–
at the prevailing price at time of purchase). The customer must pay
any and all carriage charges. No returns of discontinued products, unless within 14 days of purchase. This policy does
not affect your statutory rights and does not refer to faulty goods.
