Randell 40000 Series, Owner'S Manual

Page: 9 / 24

Unit Installation
A. Receiving Shipment
Upon arrival, examine the exterior of the shipping crate for signs of abuse. It is
advisable that the shipping crate be partially removed, in order to examine the cabinet
for any possible concealed damages which might have occurred during shipment. If no
damages are evident, replace the crate in order to protect the unit during local
delivery. If the unit is damaged, it should be noted on the delivery slip or bill of
lading and signed to that effect. A claim must be filed immediately against the carrier
indicating the extent and estimated cost of damage occurred.
B. Locating Your New Display Merchandiser
The following conditions should be considered when selecting a location for your unit:
1. Countertop load - The countertop on which the merchandiser will display
rest must be free of vibration and suitably strong enough to support the
combined weights of the units plus the maximum product load weight:
MODEL
ACTUAL NEEDED
COUNTER CAPACITY
4030GA 426LBS.
40026A 407LBS.
40026SSA 407LBS.
2. Clearance - There must be a combined total of at least 10" clearance at the top of
the unit.
3. Ventilation - The air cooled self contained display merchandiser requires a
sufficient amount of cool clean air. Avoid placing the unit near heat generating
equipment such as ovens, ranges, heaters, fryers, steam kettles, etc. and out of direct
sunlight. Avoid locating the make table in an unheated room or where the room
temperature may drop below 55
°
F or above 90
°
F.
9