9
Getting Started
Exhibit 6.
Calibrate Screen
Screen Calibration
As soon as the TND
™
760 is running, calibrate your screen.
Recalibrate from time to time, especially if the screen “slips”
when you touch it.
To calibrate your screen:
• Press and hold the
Home
button for 10 seconds.
Calibration starts once button is released.
• Tap the center of the crosshairs as they appear on the calibration
screen [Exhibit 6]. There are four total.
- Tap as close to the center of the crosshairs symbol (+) as possible.
- Use the same pressure you normally use when tapping the screen
- If you receive an error, try again.
Note:
Do NOT press and hold finger on the center of the crosshairs.
Just tap.
TND
™
760 Fleet Edition User Manual
For Sales Information Please Contact
RoadTrucker Inc
(www.RoadTrucker.com)
8312 Sidbury Rd.
Wilmington, NC 28411
(800) 507-0482 / (910) 686-4281
