Rand McNally Intelliroute TND-710 User Manual Download

Page: 27 / 150

Rand McNally IntelliRoute

TND

710 User’s Guide

Version 2.0.1

Set Truck Information

Note

Only available when in Truck mode.

The IntelliRoute® TND™ 710 uses truck information to calculate a route for your

specifi c type of truck and load. For more, see “Truck Information” on page 109.

From the

Main Menu

Tap

Truck Tools

Truck Info

Tap

and

to view the options.

3. Tap the option to be set.

4. Enter the new information.

Tap

Back

to save changes.

Set ETA Adjustment

Set adjustments to your ETA due to weather or traffi

c conditions. You can add

(increase) time to make the trip take longer or subtract (decrease) time to make
the trip take less time. Adjust the ETA a little (some) or more.

Note:

Only available when in Truck mode. See “Truck Information” on page 109 for

more information.

From the

Main Menu

Tap

Truck Tools

Truck Info

Tap

and

to view the options.

3. Tap on the

ETA Adjustment

option and select the type of adjustment to be

performed.

Tap

Back

to save changes.

Truck Info Window

Summary of Contents for Intelliroute TND-710























































































































































Search results

Summary of Contents for Intelliroute TND-710

Reviews:

Related manuals for Intelliroute TND-710

Brands by name

Popular brands

Rand McNally Intelliroute TND-710, User Manual

Search results

Summary of Contents for Intelliroute TND-710

Reviews:

Related manuals for Intelliroute TND-710

Brands by name

Popular brands