Rand McNally Intelliroute TND-710 User Manual Download

Page: 124 / 150

Rand McNally IntelliRoute

TND

710 User’s Guide

Version 2.0.1

117

Warning Options

To change these settings, from the Main Menu:

•

Tap

Truck Tools

Warnings

Note:

Only available in Truck mode. See “Select Truck or Car Mode” on page 21.

Note:

Also see the

Warning

option in “Vehicle Options (Truck or Car)” on page 110

for information on setting how warnings will be issued (visual, audio, visual and
audio, etc.)

Hills & Sharp Curves

Specify when (in miles) to issue a warning before reaching
a hill or sharp curve.

Driving Day

Specify when (in hours and minutes) to issue a warning
before reaching your driving hours limit.

On Duty Hours

Specify when (in hours and minutes) to issue a warning
before reaching your duty hour limit.

On Duty Week

Specify when (in hours and minutes) to issue a warning
before reaching your duty week limit.

Speed Limit Display

Specify how speed limit information displays. Options are:
None (speed limit never displays), Truck Only (Limited)
(show truck speed limit if available), or Show Car if No
Truck (show car speed limit if a truck speed limit is not
available).

Speed Limit Alert

Specify when (in MPH) to issue a warning when exceeding

the speed limit.

State Border Alert

Specify when (in miles) to issue a warning about an

upcoming state border.

Crossing State Border/Time Zone Change Warning

Specify whether a warning is issued when crossing a state
border to changing time zones.

Warnings Window

Summary of Contents for Intelliroute TND-710























































































































































Search results

Summary of Contents for Intelliroute TND-710

Reviews:

Related manuals for Intelliroute TND-710

Brands by name

Popular brands

Rand McNally Intelliroute TND-710, User Manual

Search results

Summary of Contents for Intelliroute TND-710

Reviews:

Related manuals for Intelliroute TND-710

Brands by name

Popular brands