background image

SOF_7.5.1-07-04

Effective date: 28-Sep-07

User Guide

CustomAir

®

by RAMVAC®

T

hank you for selecting a CustomAir

by RAMVAC

 Dental Compressed Air System to serve your dental facility.

CustomAir

by RAMVAC

 compressors use proven oil-less technology to set new standards in compressed air system performance, durability and 

economy.  

Invest a few minutes of your time and:

1.  Read the “Maintenance” section in this guide.  Use these simple preventive procedures that will allow your

 

compressor to reach its service-life potential.

2.  Read the “Operation” section in this guide. 

 

Find out how to best control your compressor and put its safety features to work for you.

3.  Initiate the warranty.  Check inside the back cover to review our warranty commitment to you ... and what you

 

need to do to receive warranty coverage.

 

To initiate the warranty you must:  1.  Complete and return the Installation Checklist to RAMVAC.

 

 

or

 

 

2.  Visit our website at www.ramvac.com and complete the warranty initiation form.

All of us at RAMVAC

®

 appreciate your business and take a personal interest in your satisfaction.  Please let us know how the system is working for 

you.  Just give us a call or stop by one of our dental show exhibits.  Please accept my personal invitation to visit our manufacturing facility in the 

beautiful

 Black Hills of South Dakota.

Matt Olson

General Manager, RAMVAC

®

 Dental Products. Inc.

(800) 5-RAMVAC

(800) 572-6822

Safety and Regulatory Information

CustomAir

by RAMVAC

 compressors meet the most current and highest safety standards.  CustomAi

r

by RAMVAC

 compressors are UL 60601 classified,

comply with NFPA 99C Level 3 gas system requirements, and are manufactured in a FDA Registered, ISO 9001:2000 and ISO 13485:2003
certified facility.

Here’s what you need to do to ensure the safety potential of this equipment is achieved:
 

• 

Make sure your equipment is installed according to our written instructions and the Installation Checklist is completed.

 

  If you have purchased your CustomAir compressor from an authorized dealer, the dealer is responsible for presenting you with

 

  the completed checklist.  

 

• 

Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide.

 

•  Type of protection against electrical shock:  “Class 1”

 

•  Degree of protection against elecrical shock: “Type B”

 

•  The C1 Control is designated “IPX0” and must be protected from ingress of water.

The C1 Control label includes safety symbols with special meanings:

This means there is more 

information available in this 

User Guide.

This stands for a “Type B Applied Part”,

which means the equipment is approved for 

patient contact.

Inside Front Cover

Summary of Contents for CustomAir 1000 Series



















Reviews: