Page 2
SOF_7.5.1-07-04
Effective date: 28-Sep-07
CustomAir
®
by RAMVAC®
User Guide
UNPACKING
Unpacking Instructions for the CustomAir
by RAMVAC
Compressor
1. Carefully remove the shipping carton from the pallet containing the compressor.
2. Visually inspect the entire compressor for shipping damage.
a. Visually inspect the motor isolator mounts for tearing.
b.
If shipping damage is found, immediately contact the freight carrier and supplier.
3. Remove lag screws holding the compressor to shipping pallet.
4. Verify additional parts shipped with the compressor:
a. Additional parts shipped with all compressor models:
• Supply Hose, 1/4”npt x 3/8”npt, 6’ in length
• Drain tubing, 3/8” plastic, 4’ in length
• Bushing, 1/2”mpt x 3/8”npt
b. Additional parts shipped with 1022 model only:
• Air Intake tubing, 1/2” OD plastic, 10’ in length
Remember to fill out and mail in the Installation Checklist to intiate the warranty !!!
A Sound Reduction Cover is available for most models when installed in a sound sensitive area.