In order to ensure the water dispenser with enough stability, users should follow below instructions to
fix the unit:
1. Remove one of the body rear’s screw(upper right corner or upper left corner)(Picture 1)
2. Install a bracket where you have removed the screw already, fix the bracket tightening the
removed screw on the right location(Picture 2)
3. Fix the bracket on the wall side or similar object(if the wall side is too rigidity), you can make a
hole by electric drill, then using expanded screw tightening the bracket(Picture 3)
4 Warning: To avoid a hazard due to instability of the appliance, it must be fixed in accordance with
the instructions.
