Instruction Manual – Ramsond CUT series plasma cutters Rev 10-0993
© Copyright Ramsond Corporation. All rights protected. Unauthorized reproduction prohibited.
Page 8
3.3 - BACK PANEL
AIR REGULATOR
– Apply supplied thread tape
on all fitting, double check for any leaks
AIR LINE TO GAUGE
– Ensure that airline is
firmly installed into quick disconnect fitting
PRESSURE REGULATOR
– Adjust pressure to
desired levels.
NOTE THE ARROW DIRECTION ON THE
REGULATOR TO ENSURE PROPER
INSTALLATION. (See Following Page)
AIR LINE IN
– Ensure filter screen is free from
debris. DO NOT OVER TIGHTEN HOSE
CLAMPS
GROUND
– Optional ground connection.
Suggested ground for product safety.
*BEFORE EACH USE INSPECT POWER
CABLE TO ENSURE THERE ARE NO
BREAKS, CUTS, OR DEFECTS. IF CABLE IS
FOUND TO BE DEFECTIVE DO NOT USE.
REPAIR OR CONTACT TECHNICAL SUPPORT
