Ramsey Winch 400, Operating, Service And Maintenance Manual

Page: 4 / 30

4
PLEASE READ THIS MANUAL CAREFULLY.
This manual contains useful ideas in obtaining the most effi cient operation from your
Ramsey Winch, and safety procedures one needs to know before operating a Ramsey
Winch.
WARRANTY INFORMATION
Ramsey Winches are designed and built to exacting specifi cations. Great care and skill
go into every winch we make.
If the need should arise, warranty procedure is outlined on
the back of your self-addressed postage paid warranty card. Please read and fi ll out the
enclosed warranty card and send it to Ramsey Winch Company.
If you have any prob-
lems
with your winch, please follow instructions for prompt service on all warranty claims. Refer
to back page for limited warranty.
NOTE: The rated line pulls shown are for the winch only. Consult the wire rope manufacturer for
wire rope ratings.
INTRODUCTION
Rated Line Pull 1st layer (lbs.)...........................10,000
(Kgs.)...........................4,530
Shipping Weight: 400/Y-400 ....................125 lbs. (57 Kgs..)
G-400/GY-400.................135 lbs. (61 Kgs.)
H-400/HY-400 ...............150 lbs. (68 Kgs.)
HG-400/HGY-400 ..............160 lbs. {73 Kgs.)
2 3 4
Rated Line Pull per
layer for
400/G-400 Lbs. 8,200 6,900 6,000
H-400/HG-400 Kgs. 3,710 3,120 2,710
Rated Line Pull per
layer for
**
Y-400/GY-400 Lbs. 8,300 7,100 6,200
HY-400/HGY-400 Kgs. 3,760 3,210 2,800
*Long Drum
**
Cable capacity per Ft. 55 90 130
layer for 400/G-400 M. 16 27 39
H-400/HG-400
*Short "Y" Drum Cable
capacity per layer
Y-400/GY-400 Ft. 45 70 105
HY-400/HGY-400 M. 13 21 31
Worm
RPM 1 2 3 4
400/G-400 FPM 33 40 47 53
H-400/HG-400 MPM
840
10 12 14 16
Y-400/GY-400 FPM 34 40 47
54
**
HY-400/HGY-400 MPM 840 10.5 12.3 14.5 16.6
*These specifications are based on recommended cable of 7/16" (11mm) 6x19 extra
improved plow steel cable.
**Lost Ioyer does not conform to SAE J706
Line Speed
20
6
25
7
10,000
4,530
10,000
4,530
Layer of Cable 1
SPECIFICATIONS: CONFORMS TO SAE J706
Gear Reduction: 400/H-400............................................................................................29:1