RA54 WARRANTY AND LIMITATIONS
Ramset warrants that new RA54 power
fastening tools, parts and accessories will be
free from defects in material and workmanship
for the period shown below.
THREE-YEAR WARRANTY
A three-year warranty will apply to all parts,
except those listed below as normal wearing
parts, or parts which are specifically covered by
an extended warranty
The following parts are considered normal
wearing parts and are excluded from the
warranty:
• Piston • Buffer
• Spring Clips
• Pawls • Piston Rings • Piston Return Spring
The warranty period is based off of tool build
date, determined from the tool serial number.
Ramset may extend the warranty time frame
from the date of purchase with a qualifying
document proving date of purchase.
WARRANTY STATEMENT
Ramset’s sole liability hereunder will be to
replace any part or accessory which proves
to be defective within the specific time period.
Any replacement part or accessory provided
in accordance with this warranty will carry
a warranty for the balance of the period of
warranty applicable to the part it replaces.
This warranty does not apply to part
replacement required due to normal wear.
This warranty is void as to any tool which has
been subjected to misuse, abuse, accidental
or intentional damage, use with fasteners, and
loads not meeting Ramset specification, size or
quality, improperly maintained, repaired
with other than genuine RA54 replacement
parts, damaged in transit or handling, or which,
in Ramset’s opinion, has been altered or
repaired in a way that affects or detracts from
the performance of the tool.
Ramset MAKES NO WARRANTY,
EXPRESSED OR IMPLIED, RELATING
TO MERCHANTABILITY, FITNESS, OR
OTHERWISE, EXCEPT AS STATED ABOVE
and the liability AS STATED ABOVE AND
AS ASSUMED ABOVE is in lieu of all other
warranties arising out of, or in connection with,
the use and performance of the tool, except to
the extent otherwise provided by applicable law.
Ramset SHALL IN NO EVENT BE LIABLE FOR
ANY DIRECT, INDIRECT, OR CONSEQUENTIAL
DAMAGES, INCLUDING, BUT NOT LIMITED TO
DAMAGES WHICH MAY ARISE FROM LOSS
OF ANTICIPATED PROFITS OR PRODUCTION,
SPOILAGE OF MATERIALS, INCREASED COST
OF OPERATION OR OTHERWISE.
Ramset reserves the right to change
specifications, equipment, or designs at any
time without notice and without incurring
obligation.
© 2021 Illinois Tool Works Inc.
THE MODEL RA54 COMPLIES WITH OSHA REQUIREMENTS
AND WITH ANSI A10.3 SPECIFICATIONS
FOR TOOL REPAIR SERVICE CONTACT YOUR LOCAL AUTHORIZED
RAMSET DISTRIBUTOR OR TO FIND YOUR NEAREST RAMSET TOOL
REPAIR CENTER VISIT OUR WEBSITE AT WWW.RAMSET.COM
OR CALL 800-241-5640
Concrete Fastening Systems
Glenview, IL 60025
800-848-5611
www.ramset.com
Buy with Confidence…
Buy From Your Authorized Distributor
AN ILLINOIS TOOL WORKS COMANY
© ILLINOIS TOOL WORKS 2021
PRINTED IN TAIWAN
FORM NO. SS165 – 05/21
