background image

7

EC Declaration of Conformity

 

 

DECLARATION OF CONFORMITY 

BATTERY CHARGERS 

 

 

Year of Manufacture:              2018 

 

Manufacturer:                           Euramco Safety, Inc. 

                                                      2746 Via Orange Way 

                                                      Spring Valley, Ca. 91978 USA 

                                                      

Equipment Description:          R2C-5500AC – Universal AC Input, 42VDC @ 2 Amp Output 

                                                     R2C-5500AC230 – Universal AC Input, 42VDC @ 2 Amp Output 

                                                     R2C-5500DC – 12-24VDC Input, 42VDC @ 2 Amp Output 

  

 

 

     BPV-12CE – 12V Battery Charger (EURO) 

 

 

European Directives:               2006/42/ EC – Machinery Directive 

                                                     2014/30/EU – EMC Directive 

                                                     2014/35/EU – Low Voltage Directive 

 2011/65/EU – Restriction of Hazardous Substances Directive 

 

 

 

 

  

Standards to which this Conformity is Declared: 

                                                   

                                                     BS EN ISO 13857:2008 – Safety Distances 

                                                     BS EN ISO 12100:2010 – Safety Machinery 

                                                     BS EN 6100-6-4:2007+A1:2011 – EMC Industrial Generic Emission 

                                                     BS EN 6100-6-2:2005 – EMC Immunity/Industrial Environments 

 

Euramco Safety, Inc. hereby declares that the equipment described above conforms to the relevant 

Essential Health & Safety Requirements of the European Machinery Directive 

2006/42/EC, and the 

Additional Directives and Standards listed above. 

 

 

 

 

 

                                                                                                           DATE     11/28/2018                 

___________8/21/2018_________________ 

                                                                                                                                                      

                                                                                                                                                     

 

                                                  

 

 

 

Summary of Contents for R2C-5500AC













Reviews: