background image

6

The battery charger will hold and charge two battery packs at one time.  
Charger will function with one or two battery packs installed.

Align battery pack with holder and drive battery into position until a loud click is heard.
Attach charging cables to the battery pack(s).

Battery charger will determine if batteries are attached, measure & report battery charge/ 
fuel level, and initiate a charge cycle.

Typical charge time for a fully discharged battery is approximately 6 hours. Partially  
discharged batteries will take less time.

• Charger is not supplied with an ON / OFF power switch.

• Charger is active as soon as input power is applied.

  GREEN LED lights flash 20 times over a 10 second period when power is first applied to the Dual    

  channel Battery Charger.

• LED lights will remain OFF until a battery pack is connected to the charger.

• Battery pack charge status will be reported by the LED status lights.

NOTES:

Battery Pack Installation 

Battery Charger comes with a 12 month limited warranty. This does not cover damage 
due to improper handling. For information please visit 

www.RAMFAN.com.

The customer service department will answer your questions regarding repairs and 
maintenance for your product as well as regarding spare parts and operation. You can also 
find further information at 

www.RAMFAN.com.

Warranty  

Customer Service and Advice  

Disposal  

Charging devices, accessories and packaging should be recycled in 
an environmentally-friendly manner.

Only for EU countries: Do not dispose of charging devices in 
household waste. In accordance with the European Directive 
2012/19/EC on Waste Electrical and Electronic Equipment and its 
implementation into national law, unserviceable chargers should 
be collected separately and recycled in an environmentally-friendly 
manner. 

Environmentally Safe Battery Disposal

Battery pack(s) contain Li-ion, a toxic material. All toxic materials must 
be disposed of in a specified manner to prevent contamination of the 
environment. Before disposing of damaged or worn out Lithium-ion battery 
packs, contact your local waste disposal agency, or the local Environmental 
Protection Agency for information and specific instructions. Take the batteries 
to a local recycling and/or disposal center, certified for Li-ion disposal.

Summary of Contents for R2C-5500AC













Reviews: