background image

 

 

11

 

Disconnect power before disassembly or cleaning. Never immerse or directly spray cable and connectors 

with liquids. Clean cables with commercially available biodegradable cleaning solutions. Do not use 
solvents containing hydrocarbons (i.e. MEK, Acetone). 

There are no user serviceable parts. Contact factory for replacement part applicability. 

Do not change make or model number the power extension cables for any reason! 

Cautions 

 

The ATEX / IECEx Power Extension Cables are intended for use in Explosive Atmospheres in accordance 

with ATEX Directive 2014/34/EU. It is the user's responsibility to determine the suitability of the power 
extension cables for the intended purpose. 

CAUTION! THESE POWER EXTENSION CABLES ARE NOT INTENDED FOR USE IN MINES SUSCEPTIBLE TO 

FIREDAMP.

 

Do not operate if there is any physical damage to cord, plug or receptacle. 

Fatal electrical shock may result if power extension cables are not grounded in compliance with electrical 

code. 

Keep away from children. 

ATEX / IECEx Extension Cable Rating: 

II 2 G Ex db eb IIC T6 Gb, II 2 D Ex tb IIIC T80°C Db 

Euramco Safety hereby declares that the equipment listed in this manual conforms to the relevant 

Essential Health and Safety Requirements of the European Machinery Directive and standards listed 
below. 

Standards to which conformity is declared: See Declaration of Conformity (last page). 

The ATEX / IECEx 

Power Extension Cables complies with International Standards EN 60079-0:2012+A11:2013, EN 60079-
1:2014, EN 60079-7:2015, & EN60079-31:2014. 

Category, Group and Zone Classifications

 

According to ATEX Directive (2014/34/EU) 
The power cables are built with three critical parts; Cable, Plug, and Couplers.  The H07RN-F cables were 

selected based on the need for extra heavy-duty applications.  Plugs and couplers were selected based 
on the most used European connectors for hazardous locations. 
    

The Power Extension Cables have been certified to meet the ATEX Directive 2014/34/EU certification for 

II 2 G Ex db eb IIC T6 Gb, II 2 D Ex tb IIIC T80°C Db 

Accessories 

 

None 

SM-ECXCABLE Rev B 

Summary of Contents for ECX-110
















Reviews: