EXC-1-10.50R-10.3-5.15P
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
1
of
2
1' Foot Adapter Cable
10-50C Molded Connector to 5-15P - 1' 10/3 SOOW Cable
Instruction Manual
Thank you for your purchase of the Larson Electronics
EXC-1-10.50R-10.3-5.15P
.
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CRITICAL SAFETY INSTRUCTIONS:
•
INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY
RELEVANT LOCAL BUILDING CODES.
•
RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF
FIXTURE'S
ELECTRICAL
SYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.
•
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•
MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE
FIXTURE'S
RATED VOLTAGE.
•
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP
OBJECTS. SUITABLE FOR DAMP LOCATIONS.
WARNING:
USER SHOULD BE TRAINED IN THE PROPER USE AND MAINTENANCE OF THIS DEVICE.
THIS LINE
CORD IS INTENDED TO ALLOW OPERATORS TO EXTEND POWER TO EQUIPMENT WHEN STATIONARY OUTLETS ARE NOT
READILY AVAILABLE.
IMPROPER USE OF THIS CORD, PLUG, AND RECEPTACLE CAN LEAD TO SERIOUS INJURIES OR DEATH TO
PERSONNEL.
PERIODIC INSPECTION OF THE CORD IS NECESSARY.
THE CORD MUST BE ROUTINELY CHECKED FOR CUTS, BREAKS, OR ANY SEVERE ABRASIONS, AND IF ANY ARE FOUND,
THE CORD MUST BE REPLACED BEFORE RESUMING USE.
This adapter cable allows operators to plug existing 10-50P plugs into the female 10-50C connector. The 10-50C is connected to a male
5-15P 15 amp straight blade plug via 1' of 10/3 SOOW cable. This allows operators to power equipment terminated in 10-50P plugs via
5-15R or 5-15C receptacles and outlets.
NOTE: This adapter plug is designed for dual voltage machines. Please check your power source voltage before operating.
220-240V equipment will not properly operate on 110/120V and may cause malfunction or damage to device being plugged in if
operated on the incorrect voltage.
OPERATION
Insert
5-15P
male end into matching receptacle outputting no more than max specifications shown below. Plug
compatible equipment into
10-50C
female
receptacle on other end.
Specifications
Male Cord Cap:
5
-
15
P
Female Cord Cap:
10-50
C
Cable Type:
10
/
3
SOOW
Cable Length:
1'
