RAM Ele Lifts
1-800-563-4382
25
4.10: Anchoring
Materials
Tools
Components
Name
#
Name
#
Concrete Drill & 3/8” Bit
1
Lift Assembly (4.9)
1
Claw Hammer
1
Anchors
4
9/16” Wrench
1
Front Cover
1
Phillips Head Screwdriver
1
Front Cover Screws
3
Instructions
Note
Once the base legs are anchored into place, it is
very difficult to change the lift’s location, so it is
important that you are happy with its position
before continuing the installation.
Provided with your lift are four
concrete
anchors. If
you are anchoring the lift into another material,
please use anchors specifically for that material.
1)
Drill
four
holes using the holes - 2 in
each base leg
( A )
- up to the mark you
put on the bit.
2)
Insert the anchors into the holes
threaded side-up, and hammer in. Tighten
the nut on the anchors with the 9/16”
wrench to set them in place.
Note
The front cover of the lift will not be reinstalled until after testing has been carried out (
5.6: Reinstalling
the Front Cover
).
4.11: Installing Additional Components
If you ordered your lift with an additional component that is not referred to in this manual,
proceed to the supplemental manual for such add on now (ex. Call Station, UPS, etc.)
A
1
2
