RAM Trus-T-Lift, Installation Manual, Page: 17 / 32

1-800-563-4382 RAM Ele Lifts
14
4.3: Platform
Materials
Tools Components
Name
#
Name
#

Phillips Head Screwdriver 1

Tower and Base Leg Assembly (4.1) 1

3/8” Socket Ratchet 1

Platform 1

15/16” Socket 1

Platform Mounting Bolts (1/2” Bolt) 2

3/4" Socket 1
Instructions
1) Use the Phillips head screwdriver to loosen the screws holding the top cover
( 1 )
. Note
that they do not need to be removed, only loosened. Remove the top cover.
Note
The front panel of the tower is fastened with both screws and snap-together pads, so it may take a
small amount of pressure to remove once the screws have been removed.
2) Remove the front cover screws
( 2 )
using the Phillips head screwdriver and remove
the front panel ( 3 ) .
3) Carefully slide the platform onto the base legs until it lines up with the guide frame.