1-800-563-4382
RAM Ele Lifts
18
3)
Install the Toe Plate Mounting Bolts (3/8” bolts) using the ratchet, socket, and
extension.
4)
Use the utility knife to remove the packaging on the grab rail and rocker arm.
5)
Remove the #10 screws from the rocker arm
6)
Line up the screw holes with the holes on the side of the toe plate, and fasten the
rocker arm to the toe plate.
7)
Test the toe plate’s operation by raising and lowering the platform. It should come down
to become a ramp at the bottom, and raise fully verticle as the platform raises.
