RAM promaster city 2017 Owner'S Manual Download Page 68 | Manualshive

Page: 68 / 359

background image

Installing Child Restraints In Commercial Vehicles

This commercial vehicle is not designed for use as a family
vehicle and is not intended for carrying children in the
front passenger seat(s). Never install rear-facing child
restraints in this vehicle. Although the seat belt can be
locked to secure a child restraint, there are no tether
anchorages to complete the proper installation of a
forward-facing child restraint. If you must carry a child in
a forward-facing child restraint, the passenger seat should
be moved to the full rearward position and the child must
be in a proper restraint system based on its age, size and
weight. Follow the instructions below to secure the child
restraint using the seat belt.

WARNING!

Rear-facing infant restraints must never be secured in
the passenger seat of a vehicle with a passenger Air
Bag. In a collision, a passenger Air Bag may deploy
causing severe injury or death to infants riding in
rear-facing infant restraints.

Installing Child Restraints Using The Vehicle Seat
Belt

Child restraint systems are designed to be secured in
vehicle seats by lap belts or the lap belt portion of a
lap/shoulder belt.

WARNING!

•

Improper installation or failure to properly secure a
child restraint can lead to failure of the restraint. The
child could be badly injured or killed.

•

Follow the child restraint manufacturer’s directions
exactly when installing an infant or child restraint.

The seat belts in the passenger seating positions are
equipped with a Switchable Automatic Locking Retractor
(ALR) that is designed to keep the lap portion of the seat belt
tight around the child restraint so that it is not necessary to
use a locking clip. The ALR retractor can be “switched” into
a locked mode by pulling all of the webbing out of the
retractor and then letting the webbing retract back into the
retractor. If it is locked, the ALR will make a clicking noise
while the webbing is pulled back into the retractor. Refer to
the “Automatic Locking Mode” description in “Switchable
Automatic Locking Retractors (ALR)” under “Occupant Re-
straint Systems” for additional information on ALR.

66

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
66
67
68
69
70
...
»

Summary of Contents for promaster city 2017








































































































































































































































































































































































Reviews:

No comments

Related manuals for promaster city 2017

Green Motion Building

Brand: Eaton Pages: 12

PRIME DESIGN VRI3-E-PM11

Brand: Safe Fleet Pages: 12

Brand: Barker Pages: 2

Brand: Mazdaspeed Pages: 8

Brand: Flash Cover Pages: 2

Brand: Vauxhall Pages: 131

2013 GMC Savana

Brand: GMC Pages: 398

Brand: ULTIMATE SPEED Pages: 10

2917 Nstallation

Brand: Edelbrock Pages: 1

Brand: AutoLoc Pages: 6

Brand: Westin Pages: 3

Brand: Westin Pages: 3

CHALLENGER HELLCAT 2017

Brand: Dodge Pages: 484

C-Max Energi 2014

Brand: Ford Pages: 10

Brand: Belkin Pages: 30

Brand: Mitsubishi Pages: 141

Brand: TrailPRO Pages: 3

Brand: Nav TV Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands