RAM promaster city 2017 Owner'S Manual Download Page 128

Page: 128 / 359

2. Push and release the

down

arrow button (by

single pushes) to scroll through all the submenu options.

3. Briefly push and release the

MENU

button to select the

displayed submenu option and to open the relevant
setup menu.

4. Push and release the

down

arrow button (by

single pushes) to select the new setting for this submenu
option.

5. Briefly push and release the

MENU

button to store the

new setting and go back to the previously selected
submenu option.

6. Push and hold the

MENU

button to return to the main

menu (short hold) or the main screen (longer hold).

Instrument Cluster Display Menu Items

Speed Beep

This function is used to set a speed limit (MPH or km/h);
the driver is alerted when this limit is exceeded.

To set the desired speed limit:

1. Push the

MENU

button briefly. The display will show

the wording (SPEED) and the unit (MPH) or (km/h)
previously set.

2. If the function is on, push and release the

down

arrow button to select the required speed limit and then
push

MENU

to confirm.

NOTE:

The speed may be set in the range from 20 to

125 MPH (30 to 200 km/h) according to the previously
chosen unit.

The setting will increase/decrease by five units each time
the

down

arrow button is pushed. Hold down the

down

arrow button to automatically increase/decrease

the setting rapidly. Complete the adjustment when you
approach the desired value.

Push the

MENU

button briefly to return to the menu

screen or hold the

MENU

button down to return to the

standard screen without storing.

To cancel the setting:

1. Briefly push the

MENU

button. “ON” will flash in the

display.

2. Push the

down

arrow button. “OFF” will flash in the

display

3. Push the

MENU

button briefly to return to the menu

screen or hold the

MENU

button down to return to the

standard screen without storing.

126

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for promaster city 2017








































































































































































































































































































































































Search results

Summary of Contents for promaster city 2017

Reviews:

Related manuals for promaster city 2017

Brands by name

Popular brands

RAM promaster city 2017, Owner'S Manual

Search results

Summary of Contents for promaster city 2017

Reviews:

Related manuals for promaster city 2017

Brands by name

Popular brands