RAM promaster city 2017 Owner'S Manual Download Page 130

Page: 130 / 359

2. When you have made the required settings, push the

MENU

button briefly to go back to the submenu screen

or hold the button down to go back to the main menu
screen without saving.

3. Hold the

MENU

button down again to return to the

standard screen or to the main menu according to where
you are in the menu.

Set Date

With this function, it is possible to set the date.

To adjust the date:

1. Push the

MENU

button; the “year” will flash on the

display.

2. Push and release the

down

arrow button to adjust.

3. Push the

MENU

button; the “month” will flash on the

display.

4. Push and release the

down

arrow button to adjust.

5. Push the

MENU

button; the “day” will flash on the

display.

6. Push and release the

down

arrow button to adjust.

The setting will increase or decrease by one unit each time
the

down

arrow button is pushed. Hold down the

down

arrow button to increase/decrease the setting

rapidly and automatically. Complete the adjustment when
you approach the desired value.

Push the

MENU

button briefly to return to the menu

screen or hold the

MENU

button down to return to the

standard screen without storing.

Autoclose

When activated (On), this function locks the doors auto-
matically when the vehicle speed exceeds 12 mph
(20 km/h).

To activate or deactivate this function:

1. Push the

MENU

button briefly to display a submenu.

2. Push the

MENU

button briefly to make the display flash

On or Off according to the previous setting

3. Push the

down

arrow button to select.

4. Push the

MENU

button briefly to return to the submenu

screen or hold the button down to return to the main
menu screen without saving.

128

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for promaster city 2017








































































































































































































































































































































































Search results

Summary of Contents for promaster city 2017

Reviews:

Related manuals for promaster city 2017

Brands by name

Popular brands

RAM promaster city 2017, Owner'S Manual

Search results

Summary of Contents for promaster city 2017

Reviews:

Related manuals for promaster city 2017

Brands by name

Popular brands