316
IN CASE OF EMERGENCY
(Continued)
F98
–
20 Amp Yellow
Front Heated Seat Driver – If Equipped (HD Only)
F99
–
10 Amp Red
HVAC / DASM (DS 1500 Only)
HVAC / In-Car Temperature Sensor / CSG MOD / Humidity
Sensor (HD Only)
F100
–
10 Amp Red
Upfitters – If Equipped (HD Only)
F101
–
15 Amp Blue
SSV Only
F101
–
20 Amp Yellow
Rear Heated Seat Right (HD Only)
F102
–
20 Amp Yellow
Rear Heated Seat Left / Run RLY #3 Coil (HD Only)
F103
–
10 Amp Red
HeadLamp AFLS (HD Only)
F104
–
20 Amp Yellow
Power Outlets (Instrument Panel / Center Console) / Trunk
– If Equipped (DS 1500 Only)
UCI Port / USB Rear (HD Only)
Cavity
Cartridge Fuse
Micro Fuse
Description
CAUTION!
When installing the power distribution
center cover, it is important to ensure the
cover is properly positioned and fully
latched. Failure to do so may allow water to
get into the power distribution center and
possibly result in an electrical system
failure.
When replacing a blown fuse, it is important
to use only a fuse having the correct
amperage rating. The use of a fuse with a
rating other than indicated may result in a
dangerous electrical system overload. If a
properly rated fuse continues to blow, it
indicates a problem in the circuit that must
be corrected.
CAUTION!
(Continued)
19_DJD2_OM_EN_USC_t.book Page 316