NOTE:
•
The rear center head restraint (Crew Cab) has only
one adjustment position that is used to aid in the
routing of a tether. Refer to “Occupant Restraint Sys-
tems” in “Safety” for further information.
•
Do not reposition the head restraint 180 degrees to
the incorrect position in an attempt to gain addi-
tional clearance to the back of the head.
REAR HEAD RESTRAINT REMOVAL
To remove the head restraint, push the adjustment but-
ton and the release button while pulling upward on the
whole assembly. To reinstall the head restraint, put the
head restraint posts into the holes and adjust it to the
appropriate height.
NOTE:
To remove outboard restraints, the rear seat bottom
must be folded up.
WARNING!
•
A loose head restraint thrown forward in a collision
or hard stop could cause serious injury or death to
occupants of the vehicle. Always securely stow
removed head restraints in a location outside the
occupant compartment.
•
ALL the head restraints MUST be reinstalled in the
vehicle to properly protect the occupants. Follow
the reinstallation instructions above prior to oper-
ating the vehicle or occupying a seat.
STEERING WHEEL
TILT STEERING COLUMN
This feature allows you to tilt the steering column
upward or downward. The tilt lever is located on the
steering column, below the multifunction lever.
Pull the lever toward the steering wheel to unlock the
steering column. With one hand firmly on the steering
wheel, move the steering column up or down, as
desired. Release the lever to lock the steering column
firmly in place.
WARNING!
Do not adjust the steering column while driving.
Adjusting the steering column while driving or driving
with the steering column unlocked, could cause the
driver to lose control of the vehicle. Failure to follow
this warning may result in serious injury or death.
HEATED STEERING WHEEL —
IF EQUIPPED
The steering wheel contains a heating element that
helps warm your hands in cold weather. The heated
steering wheel has only one temperature setting. Once
the heated steering wheel has been turned on, it will
stay on until the operator turns it off. The heated steer-
ing wheel may not turn on when it is already warm.
The heated steering wheel control button is located on
the center instrument panel below the touchscreen, as
well as within the climate or controls screen of the
touchscreen.
•
Press the heated steering wheel button
once to
turn the heating element on.
•
Press the heated steering wheel button
a sec-
ond time to turn the heating element off.
NOTE:
The engine must be running for the heated steering
wheel to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the
heated steering wheel can be programmed to come on
during a remote start.
This feature can be programmed through the Uconnect
system. Refer to “Uconnect Settings” in “Multimedia”
for further information.
Tilt Steering Lever
GETTING TO KNOW YOUR VEHICLE
33
2
