Setting Names
Setting Names Abbreviated
(Left Submenu Layer)
Submenus (Right Submenu Layer)
Calibrate Compass
Compass Cal
Cancel; Calibrate
Fuel Saver Display
Fuel Saver
On; Off
Commercial Settings — If Equipped
Commercial Settings allows the driver to set and recall
additional features when the transmission is in PARK
(P).
Push and release the
up
and
down
arrow buttons until
Commercial Settings displays in the instrument cluster
display.
Follow the prompts to enter the required PIN and enter
the Commercial Settings submenu.
Commercial Settings allows you to access the following
features (if equipped):
•
Backup Alarm — If Equipped
•
ParkSense — If Equipped
•
Aux Switches
•
PIN Setup
NOTE:
If the vehicle’s PIN is forgotten or not known, see an
authorized dealer to have the PIN reset.
DIESEL MESSAGES AND
WARNINGS — 6.7L CUMMINS
DIESEL ENGINE
Diesel Particulate Filter (DPF) Messages
The Cummins diesel engine meets all diesel emissions
standards, resulting in one of the lowest emitting diesel
engines ever produced. To achieve these emissions
standards, your vehicle is equipped with a state-of-the-
art engine and exhaust system. These systems are
seamlessly integrated into your vehicle and managed
by the Powertrain Control Module (PCM). The PCM man-
ages engine combustion to allow the exhaust system’s
catalyst to trap and burn Particulate Matter (PM) pollut-
ants, with no input or interaction on your part.
WARNING!
A hot exhaust system can start a fire if you park over
materials that can burn. Such materials might be
grass or leaves coming into contact with your exhaust
system. Do not park or operate your vehicle in areas
where your exhaust system can contact anything that
can burn.
Your vehicle has the ability to alert you to additional
maintenance required on your vehicle or engine.
The following messages may display in your instrument
cluster display:
•
Perform Service
— Your vehicle will require emis-
sions maintenance at a set interval. To help remind
you when this maintenance is due, the instrument
cluster display will display “Perform Service”. When
the “Perform Service” message is displayed in the
instrument cluster display it is necessary to have the
emissions maintenance performed. Emissions
maintenance may include replacing the Closed
Crankcase Ventilation (CCV) filter element. The pro-
cedure for clearing and resetting the "Perform Ser-
vice" indicator message is located in the appropriate
Service Information.
•
Exhaust System — Regeneration Required Now
—
"Exhaust Filter XX% Full Safely Drive at Highway
Speeds to Remedy" will be displayed in the instru-
ment cluster display if the exhaust particulate filter
reaches 80% of its maximum storage capacity.
Under conditions of exclusive short duration and low
speed driving cycles, your Cummins diesel engine
and exhaust after-treatment system may never
reach the conditions required to remove the trapped
Particulate Matter (PM). If this occurs, the “Exhaust
Filter XX% Full Safely Drive at Highway Speeds to
Remedy” message will be displayed in the instru-
ment cluster display. If this message is displayed,
you will hear one chime to assist in alerting you of
this condition
98
GETTING TO KNOW YOUR INSTRUMENT PANEL
