RAM 1500 2018 Owner'S Manual Download Page 67 | Manualshive

Page: 67 / 700

RAM 1500 2018 Owner'S Manual Download Page 67

The Automatic Dimming feature can be turned on or off

through the touchscreen.

•

Press the mirror dimmer button once to turn the feature on.

•

Press the mirror dimmer button a second time to turn

the feature off.

CAUTION!

To avoid damage to the mirror during cleaning, never
spray any cleaning solution directly onto the mirror.
Apply the solution onto a clean cloth and wipe the
mirror clean.

Automatic Dimming Mirror With Rear View Camera
Display — If Equipped

A single ball joint mirror is provided in the vehicle. It is a

twist on mirror that has a fixed position at the windshield.

The mirror installs on the windshield button with a coun-

terclockwise rotation and requires no tools for mounting.

The mirror head can be adjusted up, down, left, and right

for various drivers. The mirror should be adjusted to center

on the view through the rear window.
This mirror automatically adjusts for headlight glare from

vehicles behind you.

Automatic Dimming Mirror

3

GETTING TO KNOW YOUR VEHICLE 65

«
...
65
66
67
68
69
...
»

Summary of Contents for 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments