RAM 1500 2018 Owner'S Manual Download Page 184

Page: 184 / 700

•

Output

•

Type

•

Gain

Audio
Push and release the up or down arrow button until the

Audio display icon is highlighted in the instrument cluster

display. Push and release the right arrow button to display

the active source.
Stored Messages
Push and release the up or down arrow button until the

Messages Menu item is highlighted. This feature shows the

number of stored warning messages. Pushing the right

arrow button will allow you to see what the stored

messages are.
When no messages are present, main menu icon will be a

closed envelope.
Screen Setup Menu Item
Push and release the up or down arrow button until the

Screen Setup menu item is highlighted in the instrument

cluster display. Push and release the right arrow button to

enter the Screen Setup submenu. The Screen Setup feature

allows you to change what information is displayed in the

instrument cluster as well as the location that information

is displayed.
Settings
Personal Settings allows the driver to set and recall features

when the transmission is in PARK.
Push and release the up and down button until Settings

displays in the instrument cluster display.
Follow the prompts to display and set any of the following

Vehicle Settings.
NOTE:

Your vehicle may be equipped with the following

settings.

•

If equipped with a base radio (Non-Touchscreen) Vehicle

Settings will be included in the instrument cluster dis-

play.

•

If equipped with a Touchscreen radio, the Vehicle Set-

tings will be included in the radio head unit.

182 GETTING TO KNOW YOUR INSTRUMENT PANEL

Summary of Contents for 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2018

Reviews:

Related manuals for 1500 2018

Brands by name

Popular brands

RAM 1500 2018, Owner'S Manual

Search results

Summary of Contents for 1500 2018

Reviews:

Related manuals for 1500 2018

Brands by name

Popular brands