•
R = 0.6 mph (1 km/h)
•
N = 1.2 mph (2 km/h)
•
D = 0.6 mph (1 km/h)
•
1st = 0.6 mph (1 km/h)
•
2nd = 1.2 mph (2 km/h)
•
3rd = 1.8 mph (3 km/h)
•
4th = 2.5 mph (4 km/h)
•
5th = 3.1 mph (5 km/h)
•
6th = 3.7 mph (6 km/h)
•
7th = 4.3 mph (7 km/h)
•
8th = 5.0 mph (8 km/h)
•
9th = 5.6 mph (9 km/h) – If Equipped
NOTE:
During HDC the +/- shifter input is used for HDC
target speed selection, but will not affect the gear chosen by
the transmission. When actively controlling HDC the trans-
mission will shift appropriately for the driver-selected set
speed and corresponding driving conditions.
Driver Override
The driver may override HDC activation with throttle or
brake application at anytime.
Deactivating HDC
HDC will be deactivated but remain available if any of the
following conditions occur:
•
Driver overrides HDC set speed with throttle or brake
application.
•
Vehicle speed exceeds 20 mph (32 km/h) but remains
below 40 mph (64 km/h).
•
Vehicle is on a downhill grade of insufficient magnitude,
is on level ground, or is on an uphill grade.
•
Vehicle is shifted to park.
Disabling HDC
HDC will be deactivated and disabled if any of the
following conditions occur:
•
The driver pushes the HDC switch.
•
The driveline is shifted out of 4WD Low Range.
•
The parking brake is applied.
•
Driver door opens.
5
SAFETY
215
Summary of Contents for 1500 2018
