RAM 1500 2018 Owner'S Manual Download Page 227

Page: 227 / 700

a few seconds. If the driver or outboard front seat passen-

ger (if equipped with outboard front passenger seat

BeltAlert) is unbuckled when the ignition switch is first in

the START or ON/RUN position the Seat Belt Reminder

Light will turn on and remain on until both outboard front

seat belts are buckled. The outboard front passenger seat

BeltAlert is not active when an outboard front passenger

seat is unoccupied.
BeltAlert Warning Sequence

The BeltAlert warning sequence is activated when the

vehicle is moving above a specified vehicle speed range

and the driver or outboard front seat passenger is unbuck-

led (if equipped with outboard front passenger seat

BeltAlert) (the outboard front passenger seat BeltAlert is

not active when the outboard front passenger seat is

unoccupied). The BeltAlert warning sequence starts by

blinking the Seat Belt Reminder Light and sounding an

intermittent chime. Once the BeltAlert warning sequence

has completed, the Seat Belt Reminder Light will remain on

until the seat belts are buckled. The BeltAlert warning

sequence may repeat based on vehicle speed until the

driver and occupied outboard front seat passenger seat

belts are buckled. The driver should instruct all occupants

to buckle their seat belts.

Change of Status

If the driver or outboard front seat passenger (if equipped

with outboard front passenger seat BeltAlert) unbuckles

their seat belt while the vehicle is traveling, the BeltAlert

warning sequence will begin until the seat belts are buck-

led again.
The outboard front passenger seat BeltAlert is not active

when the outboard front passenger seat is unoccupied.

BeltAlert may be triggered when an animal or other items

are placed on the outboard front passenger seat or when

the seat is folded flat (if equipped). It is recommended that

pets be restrained in the rear seat (if equipped) in pet

harnesses or pet carriers that are secured by seat belts, and

cargo is properly stowed.
BeltAlert can be activated or deactivated by your autho-

rized dealer. FCA US LLC does not recommend deactivat-

ing BeltAlert.
NOTE:

If BeltAlert has been deactivated and the driver or

outboard front seat passenger (if equipped with outboard

front passenger seat BeltAlert) is unbuckled the Seat Belt

Reminder Light will turn on and remain on until the driver

and outboard front seat passenger seat belts are buckled.

SAFETY

225

Summary of Contents for 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2018

Reviews:

Related manuals for 1500 2018

Brands by name

Popular brands

RAM 1500 2018, Owner'S Manual

Search results

Summary of Contents for 1500 2018

Reviews:

Related manuals for 1500 2018

Brands by name

Popular brands