12
Triggering Macros
Macros can be triggered in several ways. Most commonly:
-
Wired device direct Map (WCM/WAVFR/etc.)
-
Bridge Mapping
-
Bridge Event
Once a macro trigger is sent it will perform one of four different functions to a Macro:
Start
Stop
Pause
Continue
This will cause the
Macro to start from the
beginning (Step 1)
regardless of its
current position in the
Macro.
This will cause a
Macro that is already
running to Stop
running and return to
Step 1.
This will cause a
Macro to Pause at
whatever step it is
currently running.
This will cause the
Macro to continue
from a Pause state,
performing the step
immediately after this
and proceeded.
NB
It is also possible to “Enable” and “Disable” Macros (or parts of Macros) via the “Macro Control”
Action.
10 Holiday Mode
Holiday mode allows the Bridge to record normal lighting activity in a property over a period
of time. This can then be replayed whilst the property is empty in order to give a realistic
impression that it is occupied.
Holiday mode has three states:
-
Record
: Used to create a log of the used of the system.
-
Playback
: Used when the house is unoccupied to replay the information gathered in
“Record”.
-
Idle
: Used when the system is in normal occupied operation and no recording is
being made.
Holiday mode is most easily controlled from the App. However it is also possible to change
the holiday mode state from a keypad map, Bridge map and by pressing buttons directly on
the Bridge.
NB
For how to control Holiday mode via the App. see “
App user Guide
”.
RTC-Bridge
Manual Version 2.1.2
