11
9 Macros
Macros allow a sequence of actions to take place when triggered by an Event or Map. The
Bridge can store up to 60 Macros each of which can have a maximum of 32 Steps.
The Bridge Macro screen is located from the tab in the Bridge device editor.
There are 3 steps in this example Macro:
-
Room 9, All Channels, Scene 2
-
Room 17, All Channels Scene 1
-
Room 49, All Channels Scene 2
With this simply Macro the Bridge will just run through the three commands listed. More
complex functionality can be achieved by using commands in the tables outlined below.
Writing Macros
Macro steps can be one of 4 types:
Action
Pause
Delay
Goto
Can be a simple
command including
Scenes, Fades etc.
Can also include
“Macro Control”,
“Mapping Control” for
more complex
programming.
A running Macro will
stop at a Pause and
remain there until it
hears a Continue.
The Macro can wait at
this step for a defined
period of time. Useful
when programming
PIR timeouts etc.
The Macro can be
sent to a defined step
in this or another
Macro.
RTC-Bridge
Manual Version 2.1.2
