www.scanmaxai.com
15
/
19
3 groups of lines need to be embedded in advance at the host equipment (the reserved
line length is 10cm)
(1) 12V power cord RVV2x1.0 standard and above, one end is at the host device, the
other end is pulled to the original access control dedicated power supply or the 2-pin
socket of the 220V power supply on the top of the sliding door, and the factory-built
12V1.5A power supply is connected during installation The 12V end of the adapter, the
220V power cord of the adapter is directly inserted into the 2-hole socket of the 220V
power supply.
(1) The door opening control line is RVV2x0.5 standard and above, one end is at the
host device, the other end is pulled to the original access control dedicated power
supply or the sliding door top controller, and the door opening signal interface is
connected to them during installation.
Summary of Contents for F1MAX
Page 2: ...www scanmaxai com 2 19...
