RAKINDA F1MAX, Manual

Page: 10 / 19

www.scanmaxai.com
10 / 19
Six、Product Wiring
15
Tail Wire Interface
External Interface Hardware Wiring Instructions
Type
Port
Instruction
Network Port
RJ45
Support 10/100Mbps
Relay
NC
COM
NO
Relay normally closed end/common end/normally open end. Generally, the
door lock power supply is connected to the COM terminal, and then
according to the type of door lock, the relay power supply is negatively
connected to the NO port or the NC port. Note: The maximum load of relay
contacts is 1A
Exit button
IO5
GND
Detect the key to open the door control signal, input
Call the
police
IO4
GND
Detect fire linkage control signal, input
Reset
Upgrate
GND
Support manual reset and upgrade
Serial port
RS232 TX
RS232 RX
Support serial RS232
Wiegand
WG_D1
WG_D0
Wiegand output interface, support 26bit/34bit Maxtocol
Input power
GND
12V+
Power Input: 12V DC
USB
USB_HOST-4P
External reserved USB interface to connect peripherals