Documentation Center
Figure 8: Fixing the battery
10. Fix the four M3*30mm hexagon spacers on the bottom plate.
Figure 9: Adding Spacers
11. Connect the cables as shown in Figure 10.
Connect the PH2.0 socket on the motherboard and the charging PCB board with the 2pin signal cable.
Connect the DC socket of the charging PCB board and the battery socket with a DC Plug cable.
Plug the output plug of the battery into the DC socket of the motherboard.
Figure 10: Connecting the cables
12. Fix the Charge Module in the enclosure and tighten with four screws.
