Documentation Center
Username: root
Password: root
Figure 35: Accessing the Gateway via Wi-Fi AP Mode
WAN Port (Ethernet)
Connect the Ethernet cable to the port marked “ETH” on the Gateway and the other end to the PoE port of the
PoE injector. Connect the LAN port of the PoE injector to your PC.
The default IP is 169.254.X.X. The last two segments(X.X) are mapped from the last four bits of the MAC address
of your gateway. For example, the last four bits of the MAC address are 0F:01, and the IP address is
169.254.15.1. Make sure to manually set the address of your PC to one in the same network (for example
169.254.15.100). Use the same credentials for the Web UI as for AP mode.
Figure 36: Accessing the Gateway via WAN Port (Ethernet)
Access the Internet
