Documentation Center
Figure 2: RAK19016 mounting mechanism on a WisBlock Base board with Power Slot
Hardware
The hardware specification is categorized into six parts. It discusses the interfacing, pinouts, and their
corresponding functions and diagrams of the module. It also covers the electrical, mechanical, and environmental
characteristics that include the tabular data of the functionalities and standard values of the RAK19016 WisBlock
5-24V Power Slot Module.
Interfaces
RAK19016 WisBlock 5-24V Power Slot Module provides the following interfaces:
Three-pin Screw Terminal Connector
Battery Connector
LEDs - one for charging status and two for user
Reset button
📝
NOTE
RAK19016 doesn't have a USB connector. So when RAK19016 is used together with WisBlock Base
board with power slot, it is not possible to program the core (unless via SWD pins using external tools like
Jlink and RAKDAP1). If you want to program the WisBlock Core via USB, you need the RAK5804. Then
you can use the USB connector of RAK5804 to program the WisBlock Core.
Figure 3: RAK19016 part labels
