Documentation Center
Figure 13: Attaching the Enclosure to the Wall
Pole Mounting
Step 1: Fix the installation kit on the bottom of the enclosure with four M5*10 screws. Make sure that the Z-shaped
mounting bars are NOT extruding the enclosure, as shown in the image.
Figure 14: Attaching the Installation Kit
Step 2: Slide the Steel band clamp through the rectangular hole of the mounting bar, wrap the band clamps
around the pole, lock them and then tighten the clamps using a screwdriver.
Figure 15: Attaching the Clamp to the Pole
Last Updated:
10/11/2021, 4:28:25 AM