Documentation Center
Figure 4: Attaching WisBlock Module
Step 4: If an external connection is required, for example an external sensor, remove the plug on the longer side
of the enclosure and replace it with the gland. Pull the cable to the external device through the gland and make
sure the lid of the gland is closed properly. If the gland is not closed properly, there is a chance for water and
humidity to enter into the enclosure and damage the WisBlock.
Figure 5: Attaching the Gland
Step 5: Stick the antennas of WisBlock Core module on the inner wall of the enclosure, and the figure below is
only for illustration;
Figure 6: Installing the Antennas to the Enclosure
Step 6: Install two M2.5*15+6 hexagon standoffs for the battery plate.