Documentation Center
Figure 7: Installing standoff screws
Step 7: Plug the battery cable into the socket on the PCB (if the solar panel enclosure is used, connect the cable
of solar panel to the PCB), and then fix the battery plate on the standoff with two M2.5*4 screws.
⚠
WARNING
Be sure to connect the battery and solar cable first, otherwise the cable cannot be connected after
installing the battery plate.
Figure 8: Attaching battery and Solar Panel
Step 8: Stick the battery on the battery plate with double side adhesive stickers.
Figure 9: Attaching the Battery
Step 9: Close the cover, tighten the screws and complete the assembly.