Documentation Center
Figure 10: Attaching the Cover
Installation
Wall Mounting
Step 1: Fix the installation kit on the bottom of the enclosure with four M5*10 screws. Make sure that the Z-shaped
mounting bars are extruding from the enclosure as shown in the image.
Figure 11: Installing the Bracket
Step 2: Using a Ø5mm drill bit, drill 4 holes on the wall according to the dimension of the following picture and
then plug the screw anchors in the wall.
Figure 12: 4 Drill Holes
Step 3: Fix the enclosure with the 4 screws to the wall.