E2CF
3D Printer
/ User Manual
If a child locks themselves in the machine, their life is at risk.
Do not stand on or climb onto the appliance.
Do not install the machine behind a door as this may obstruct the machine
door or prevent it from opening.
With redundant appliances, unplug the power cord and cut through the cord.
WARNING ‒ Risk of harm to health!
WARNING ‒ Choking Hazard!
Keep small parts away from children.
Do not let children play with small parts.
This machine contains many small parts and pieces. Do not allow children to
breathe in or swallow small parts.
CAUTION ‒ Risk of injury!
Never expose the machine to intense heat or humidity.
Do not use steam cleaners or sprays to clean the machine.
An ingress of moisture can cause an electric shock.
Do not sit on or lean against the appliance door.
Do not place any objects on the appliance door.
The covering plate may break if you stand on or climb onto the appliance.
The appliance may tip over if you sit on or lean against the open door.
Reaching into the chamber while the three-axis system is still moving may cause
hand injuries.
Wait for the three-axis system to come to a complete stop before reaching
inside.
WARNING ‒ Risk of scalding!
Do not touch the edge of the shovel.
Keep children away from the shovel.
The shovel provided in the accessory box has sharp parts. If the shovel is incor-
rectly used, the user may be injured.
Do not touch the shell of the printer when it is hot.
Keep children away from the printer when it is hot.
When operating or printing at high temperatures, the shell of the printer
becomes hot.
Some parts in the printer are sharp and may cause injury.
When removing the printing model, please refer to the operate guide.
WARNING ‒ Risk of burns!
A.
Safety
05
