E2CF
3D Printer
/ User Manual
N.
Maintenance
USB Storage
6
Select the "Print" tab, and choose
"USB Storage". Select the file and
check the printing parameters and
settings. Press "Print" to start
printing the test file.
Insert the USB storage device into
the USB slot on the side of the touch
screen.
During printing, you can check the
status of your printing, including
printing time and other parameters,
from the touch screen in the "Home"
interface.
NOTE:
The touch screen will display
an image of your model on-screen
during printing. This image will only
be shown when the file is sliced by
ideaMaker before being uploaded to
the printer.
②
①
③
7
8
29
