E2CF
3D Printer
/ User Manual
Read the following information to ensure safe usage of the appliance.
A.
Safety
General information
1
Intended use
2
Restriction on user group
3
This section focuses on general information about the instruction manual.
Intended Use gives information regarding the correct and safe usage of the appli-
ance.
Only use this appliance:
Avoid risks to children and vulnerable persons.
Individuals with reduced physical, sensory, and mental abilities can use this
printer. Individuals with less 3D printing expertise can also use the printer
provided they are supervised or properly trained. Training should include how to
use the printer safely and understand the resulting dangers.
Children must not play with the printer.
Keep children and pets away from the printer.
Any failure and losses caused by ignoring the following mentioned items, and
cautions mentioned in the operation and installation instruction are not covered
by our warranty and any liability.
Read this instruction manual carefully. Only this will ensure you use the appli-
ance safely and efficiently.
This manual is intended for the installer and the user of the appliance.
Follow the safety instructions and warnings.
Keep the instruction manual and the product information safe for future
reference or for the next owner.
Check the appliance after unpacking it. Do not connect the appliance if it has
been damaged in transit.
If you have any questions, please contact our local service center or distributors.
According to this installation and instruction manual.
Use in a well-ventilated and dry environment.
The environmental conditions used are:
Ambient temperature of 0-35°C;
Relative humidity of the air is below 95% (when the temperature is 25°C).
02
