background image

US English                 

8

User Manual Q-Tee II USA

User Manual Q-Tee II USA / Q-Tee II C USA / 

 

Chimney 

Flue 

Masonry 

Insulated 

Chimney 

Connector Pipe 

18” (46cm) below ceiling 

Min. 

 2” (5cm) 

Min. 

 2” (5cm) 

For rear venting or other unlisted configura-
tions, consult the local building codes and 
follow the NFPA 211 guidelines.

If the stovepipe is fitted with a baffle, it 
must be manually operated, visibly placed 
for ease of use, and must not close com-
pletely. Consult your chimney expert if you 
have any questions.  

                                                                  
I

mportant note:

Please ensure that there is easy access to 
the chimney cleanout door.

                                                                    
   

For venting vertically into a Class A chimney, a single 
wall pipe (at least 24 gauge) may be used in the room 
where the stove is installed. Refer to the manufac-
turer’s instructions for the connection to the listed 
chimney. The chimney/stove pipe must not be smaller 
than 6” (15cm) in diameter. 

For venting directly into a masonry chimney or 
through a thimble, the top of the single wall pipe 
must be at least 18” (46cm) below a combustible 
ceiling and must conform to NFPA 211 guidelines and 
methods.  Please see the diagram to the left.

 

B. 

A. 

E. 

F. 

C. 

D. 

B. 

Required Installation Components:
A. Chimney Cap 
B.  Insulated Chimney
C. Storm Collar
D.  Roof Flashing
E.  Ceiling Support Box or Joist Shield/Firestop Spacer
F.  Chimney Connector

Summary of Contents for Q-Tee II C USA





































Reviews: