RAIS Attika Pilar, Installation Manual

Page: 87 / 275

Established:
Designer: Project manager:
Format:
Approved:
Drawing no.: Revision: Project:
Drawing name:
INDUSTRIVEJ 20, 9900 FREDERIKSHAVN, DENMARK
Phone +45 98 47 90 33 - Fax +45 98 47 92 91
E-mail: info@rais.dk - Homepage: www.rais.dk
Corrections:
D M Y
ksj
Ekstern lufttilslutning - Airsystem
28-05-2019
A3
16-6512 16
1
4
1
3
2
Established:
Designer: Project manager:
Format:
Approved:
Drawing no.: Revision: Project:
Drawing name:
INDUSTRIVEJ 20, 9900 FREDERIKSHAVN, DENMARK
Phone +45 98 47 90 33 - Fax +45 98 47 92 91
E-mail: info@rais.dk - Homepage: www.rais.dk
Corrections:
D M Y
ksj
Ekstern lufttilslutning - Airsystem
28-05-2019
A3
16-6512
16
Established:
Designer: Project manager:
Format:
Approved:
Drawing no.: Revision: Project:
Drawing name:
INDUSTRIVEJ 20, 9900 FREDERIKSHAVN, DENMARK
Phone +45 98 47 90 33 - Fax +45 98 47 92 91
E-mail: info@rais.dk - Homepage: www.rais.dk
Corrections:
D M Y
ksj
Ekstern lufttilslutning - Airsystem
28-05-2019
A3
16-6512
16
5
GB - 17
GB
EXTERNAL AIR CONNECTION - AIRSYSTEM
EXTERNAL AIR CONNECTION - AIRSYSTEM
All RAIS/ATTIKA wood-burning stoves can have an external air
connection. We call this external air supply AirSystem. The air
intake to the system can be hidden by installing it either in the
floor or in the wall behind the wood-burning stove.
AIR CONNECTION THROUGH THE FLOOR
1. Place the foam rubber ring (5) below the wood-burning stove
and centre in the hole in the bottom of the stove.
2. Tap out the cover in the bottom of the wood-burning stove
using a hammer.
3 Stick the air valve (3) in the bottom of the wood-burning stove
using the gasket (2) between the stove and air valve.
4. Fit the flexible hose (4) on the spigot in the bottom of the
combustion chamber and air valve (3), and tighten using the
hose clamps (1).