RAIS/attika NEXO 100 Classic Gas Manual Download

Page: 49 / 88

SA:SU or Daily Timer ( 1 , 2, 3, 4, 5, 6, 7) is select-

ed.

• Set operating time and time for shut down by using

the same approach as during "ALL selected" (above).

• SA:SU Set operating time and time for shut down

for both Saturday and Sunday.

• Daily Timer: Unique operating times and times for

shut down can be set for an individual weekday, for

several week days or for all days of the week.

• Wait until set-up is complete.

HELP MODE

After ignition, burner 1 is ignited and burner 2 is in

the last setting.

ON:

A burner is ignited by

pressing the button. is

displayed.

OFF:

A burner is turned off by

pressing the button.

disappears.

NB!

The locking magnet valve cannot function manu-

ally. If the battery in the receiver runs out of power, it

will remain in the last operating setting.

ECO MODE

ON:

Press the button to enter

Eco mode. is displayed.

OFF:

Press the button. dis-

appears.

Summary of Contents for NEXO 100 Classic Gas

























































































Search results

Summary of Contents for NEXO 100 Classic Gas

Reviews:

Related manuals for NEXO 100 Classic Gas

Brands by name

Popular brands

RAIS/attika NEXO 100 Classic Gas, Manual

Search results

Summary of Contents for NEXO 100 Classic Gas

Reviews:

Related manuals for NEXO 100 Classic Gas

Brands by name

Popular brands