14
4. Flush the Hot Water Heater
• Run hot water in the bathtub until the water tests soft.
5. Add Salt to Brine Tank / Control Settings
• See
Salt Requirements
before filling your brine tank with salt.
• Once the brine tank is full of salt, remember to increase the salt level
in the EC4 Control Head. Go to Customer Settings on Screen (Press
the Down Arrow). Salt Lvl : # (lbs / KG)
• Refer to the Level # on the side of the brine tank to calibrate current
amount of salt in tank. Weight shown is a reference per the level.
• When using Block Type Salt, please review Stacking Figures below
for correct and incorrect stacking methods of Salt.
Correct Stacking Using
- 50 lb Salt Blocks
Standard Block Dims
- 8.5 x 8.5 x 11.5
Total Blocks Possible
- 4 =200 lbs of Salt
Level - 4.0 level
- equal to 200 lbs
(Correct)
Incorrect Stacking Using
- 50 lb Salt Blocks
Standard Block Dims
- 8.5 x 8.5 x 11.5
Total Blocks Possible
- 3 =150 lbs of Salt
Level - 4.0 level
- equal to 200 lbs
(Not Correct)
STACKING BLOCK SALT - 50 lbs BLOCKS
11.5"
8.5"
8.5"
STACKING BLOCK SALT - 25 lbs BLOCKS
INCORRECT STACKING
CORRECT STACKING
Incorrect Stacking Using
- 25 lb Salt Blocks
Standard Block Dims
- 8 x 6 x 8.5
Total Blocks Possible
- 6 =150 lbs of Salt
Level - 4.0 level
- equal to 200 lbs
(Not Correct)
Correct Stacking Using
- 25 lb Salt Blocks
Standard Block Dims
- 8 x 6 x 8.5
Total Blocks Possible
- 8 =200 lbs of Salt
Level - 4.0 level
- equal to 200 lbs
(Correct)
6"
8.5"
8"
INCORRECT STACKING
CORRECT STACKING
!
Important Note: Not all Bag Salt
or Solar Salt are the same size
and consistency. The level is a
guide to help the EC4 Control
distinguish how much salt is
remaining in Tank.
!
Important Note: Systems 250
& 400 use a larger brine tank
than the one shown. “SS”
systems use a similar tank but
half the size of the one shown.
!
Important Note: Cabinet Models
are all in one systems that do
not require separate brine tank.
Summary of Contents for EC4 SERIES
Page 31: ...31...
