10
!
Important Note: Too much
weight on the plumbing
connections will cause a leak.
!
Important Note: The bypass
valve is not designed to
withstand heat from soldering
or twisting from the attached
threaded connections.
8 . Install the Pipe Connector (Yoke) to the
Bypass Valve
• Once the plumbing is complete, connect the yoke to the bypass
valve (see figure 2).
• Support all plumbing connected to the yoke.
• Connect the raw water supply to the inlet pipe connection of the
yoke. When looking at the front of the system, the inlet is the pipe
connection on the right side of the valve (see figure 3). The arrow
molded into valve indicates the direction of flow.
• Connect the treated water pipe to the outlet pipe connection on the
yoke. When looking at the front of the system, the outlet is
the pipe connection on the left side of the valve (see figure 3).
The arrow molded into the valve indicates the direction of flow.
• Ensure that the bypass valve is in bypass position. The valve handles
should be perpendicular to the pipes (see figure 4).
INLE
T
OUTL
ET
YOKE
Figure 2
Figure 3
Figure 4
Summary of Contents for EC4 SERIES
Page 31: ...31...
